pe electrofusion fittings অনলাইন উত্পাদন

DN40-DN280 sdr11 sdr17 PE fittings HDPE electrofusion tee Description HDPE electrofusion tee is sheathed on the pipe when it is used, and then the special welding machine is used to energize the pipe fitting ... আরো পড়ুন

Description Preparation before welding: the same as ordinary welding.Mark out the welding area on the pipe.Clean the welding surface, scrape the welding surface within the scribed area about 0.2mm to remove the ... আরো পড়ুন

Description Preparation before welding: the same as ordinary welding.Mark out the welding area on the pipe.Clean the welding surface, scrape the welding surface within the scribed area about 0.2mm to remove the ... আরো পড়ুন

Description Preparation before welding: the same as ordinary welding.Mark out the welding area on the pipe.Clean the welding surface, scrape the welding surface within the scribed area about 0.2mm to remove the ... আরো পড়ুন

Description HDPE is an inert material. Except for a few strong oxidants, it can resist the corrosion of various chemical media, without electrochemical corrosion and without anti-corrosion coating.Compared with ... আরো পড়ুন

PE100 HDPE Welding Fittings 200*110mm HDPE electrofusion reducer Description HDPE electrofusion reducer, also known as reducer, is used to connect pipes of different sizes; It is generally divided into ... আরো পড়ুন

Description HDPE is an inert material. Except for a few strong oxidants, it can resist the corrosion of various chemical media, without electrochemical corrosion and without anti-corrosion coating.Compared with ... আরো পড়ুন

Description HDPE hot-melt socket reducing tee pipe fittings are produced with imported PE100 or PE80 as raw materials.The specification, size and performance of tee shall meet the requirements of GB / T 13663.2... আরো পড়ুন

Description PE butt saddle type pipe fittings lead out new branch pipe in the original pipeline, generally only the side port belongs to the rest of the pipeline and plays a fixed role.PE butt saddle pipe is a ... আরো পড়ুন

Description The pipe cap, also known as the head, is a pipe fitting welded on the pipe end or installed on the external thread of the pipe end to cap the pipe. Used to close off lines.HDPE is a kind of ... আরো পড়ুন